大型工件表面电火花刻字技术

叙述了大型工件表面刻字的有关技术和方法，从经济和技术的角度分析了用电火花加工方法进行大型工件表面刻字的原因。根据电火花加工原理和大型工件表面刻字特点提出了大型工件表面电火花刻字的技术方案。该技术方案以小型电火花机床的主轴头和电源控制柜为基础，重点研究了总体结构、电极与工件之间的三坐标移动、电极精确定位、工作液循环系统等关键技术。简要介绍了为某大型钢铁企业研制的大型轧辊电火花刻字专用机床。现场应用情况表明，该技术方案经济实用，该专用机床稳定可靠。     

40Cr与QCrO．5的恒温超塑性固态焊接

基于对40Cr表面激光淬火后与QCr0.5恒温超塑性固态焊接可行性的分析,在非真空、无保护气氛下,进行了40Cr QCr0.5的异材焊接工艺试验。试验结果表明,40Cr钢待焊接面经激光淬火预处理后与QCr0.5在预压应力56.6～84.9MPa、焊接温度750～800℃、初始应变速率(2.5～7.5)×10-4s-1的条件下,经120～180s短时压接,即可实现固态焊接,接头强度可达QCr0.5母材强度,胀大率不超过6%。焊接过程中QCr0.5发生了超塑性流变,40Cr变形甚微。     

Measurements of leucocyte membrane elasticity based on the optical tweezers

A 1-μm in diameter polystyrene bead coated with lectin is trapped by optical tweezers whics is formed by a focused laser beam (740nm).A leucocyte adhered to the bottom of sample cell is chosen to close to the trapped bead.When their stable combination is confirmed,the leucocyte is displaced by moving the sample stage.A“tether”is then formed between the trapped bead and the membrane.The force acting on the tether is measured by a detector equipped on the optical tweezers system.The deformation of the membrane is diverse in different contact conditions.When the contact area is small,the tether is very thin and the force on it is 7.4pN(10^-12N),while the tether is much thicker under a larger contact area and its corresponding force is about 14pN.It is presumed that the latter is related to the deformation of cytoskeleton.     

A complete sequence and comparative analysis of a SARS-associated virus(Isolate BJ01)

Severe Acute Respiratory Syndrome (SARS) is a newly identified infectious disease[1—5]. The global outbreak of SARS has been threatening the health of people worldwide and has killed 353 people and infected more than 5462 in 27 countries, as reported by WHO on April 29, 2003 (http://www.who.int/csr/sarscountry/en). Although it has been recognized that a variant of virus from the family of coronavirus might be the candidate pathogen of SARS[1—5], its identity as the unique pathogen sti…     

金属基体表面热熔敷玻璃涂层耐蚀性研究

利用斑点试验、点蚀试验、电化学测试及扫描电镜等方法 ,研究了熔敷温度、保温时间和稀土添加量等工艺参数对热熔敷法制备的玻璃涂层耐蚀性的影响 ,探讨了添加稀土提高玻璃涂层耐蚀性的机理。试验结果表明 ,采用热熔敷法制备的玻璃涂层有较好的耐蚀性。随着熔敷温度的提高和保温时间的延长 ,形成了一定量的晶相后会降低涂层的耐蚀性。试验结果表明 ,熔敷温度为 70 0℃、保温 5min后能够得到耐蚀性良好的玻璃涂层。添加稀土提高了釉料的软化温度和熔融釉料的粘度 ,阻止了结晶形核和晶核长大 ,减少了晶相 ,同时提高了涂层的电极电位 ,使涂层耐蚀性显著提高。当稀土含量为 2 %时 ,涂层的耐蚀性较好。     

Nd isotopic characteristics of Proterozoic metasedimentary rocks and constraints on their provenance in the eastern segment of Central Tianshan Belt, Xinjiang

Sm-Nd isotopic characteristics, εNd(t) values and Nd model ages (TDM) of Proterozoic metasedimentary rocks in the eastern segment of Central Tianshan Belt (ESCTB), Xinjiang, are used to constrain the sedimentary provenance as well as to evaluate their tectonic implications. εNd(t) and TDM values of these samples range from -4.00 to +6.36 and from 1.29 to 2.29 Ga, respectively. These feature values are distinguished from those of Archean Tarim Craton. Their average εNd(t) values of the Weiya, the Kumishi and the south to the Dikar samples are -2.46, +2.06 and +1.37, respectively. Nd model ages of the Weiya samples vary between 1.86 and 2.29 Ga, but those of the Kumishi and the south to the Dikar samples show a significant concentration at 1.6～1.9 Ga and the youngest Nd model age is 1.29 Ga. Those Nd isotopic characteristics suggest that these metasedimentary rocks could be derived from a significant proportion of Paleoproterozoic crustal source and a participation of young arc materials, rather than Archean Tarim Craton. Furthermore, the data also indicate that these two sources were paleogeographically separated. Thus we can deduce that the Kumishi and the south to the Dikar metasedimentary rocks were formed proximal to the arc side of the back-arc basin, but the Weiya metasedimentary rocks were closer to the continental side of the back-arc basin.     

冲积河流相层序地层学研究

运用沉积学及层序地层学原理 ,分析了河流类型及其形成发育特征 ,借鉴国内外有关冲积河流环境下的层序地层模式 ,特别是近海冲积环境下层序地层模式 ,并以济阳坳陷新近系为例 ,建立了更具普遍意义的冲积河流相层序地层模式 ,探讨了不同体系域的特征及其与河流类型之间的关系。研究结果表明 ,冲积河流相地层的体系域划分具有 4分性特征 ,即主要发育有低水位体系域、扩张体系域、高水位体系域 ,当基准面缓慢下降时 ,还可发育收缩体系域。根据济阳坳陷新近系沉积特征 ,指出了各体系域对应的沉积体系及相类型。其中 ,低水位体系域时期以侵蚀下切、冲积扇辫状河沉积为主 ;扩张体系域时期是由辫状河向曲流河过渡 ;高水位体系域时期以曲流河为主 ;收缩体系域时期是由曲流河向辫状河过渡。     

采用贫混凝土基层的水泥混凝土路面厚度优化

采用贫混凝土基层的水泥混凝土路面是解决重载交通的一种理想路面形式。贫混凝土基层与水泥混凝土面层的不同厚度组合会对路面荷载应力产生较大的影响,考虑实际路面的各种要求,提出了厚度优化的数学模型。利用三维有限元模型,根据在不同结构形式下的合理目标函数,分析了最佳的厚度组合比。     

小波变换在检测粘接件信号特征中的应用

在对金属与非金属粘接件性能检测的分析处理中，应用小波变换的方法对这种非平稳过程的信号进行分析，有效提取了性能检测所需要的特征参数，为提高金属与非金属粘接件性能检测的准确率和效率奠定了基础。     

一类泛函边值问题正解的存在性

讨论方程u″ a(t)f(u)=0在边界条件u’(0)=u(b)-u(a)，u(1)=∫α^βu(ξ）dξ下正解的存在性，给出了该问题至少存在一个正解的存在性定理．